• Seismic Fixture Clamp
• Model Nos.: SFC1, SFC1CF, SFC1S, SFC1E, SFC1CFS, SFC1R
• Rating: – The Seismic fixture clamp Weight is 0.2 lbs/piece
•                – The Seismic Fixture Clamp Load rating 200 lbs (90.71kg)
•                – The maximum fixture (component) weight permitted is 56 lbs (25.4kg)

• ICC-ES Acceptance Criteria for Recessed Lighting Fixtures (Luminaires)
• Suspended Ceiling Systems (AC184)

Conditions of Acceptability

• Unit shall be installed as per the following standard:- CISCA 0-2 and CISCA 3&4 **
  – 2010 California Building Code (CBC)
  – New Zealand Standard NZS 4219
  – International Building Code (IBC)
  – Uniform Building Code (UBC) **
  – National Building Code of Canada
  – National Electrical Code
  – Canadian Electrical Code
  – ASTM E580** Subject devices (seismic fixture clamps) comply with the following:- ICC EVALUATION SERVICE, INC.
  – AC 184, Clause 4.1.4.2
• Attachment Devices Used in Lieu of Code Requirements for Two Slack No. 12 Gage Wires Attaching Light Fixtures to the Structure Above the Suspended Ceilings:- The average ultimate test result, as determined in Section 4.1.1.2, of each test series shall be equal to or greater than 600 pounds (2669 N). The 600-pound (2669 N) value is based on applying a safety factor of 3 to an assumed ultimate load capacity of 100 pounds (444.8 N) for each of the two No. 12 gage slack wires required by the code.